We have the perfect weight distribution hitch for you!
When installing a weight distribution hitch The Blue Ox SwayPro Weight Distribution w/ Sway Control # BXW1000 will be the easiest to install then all the other systems. The chain style hitches don't require you to use a lever to snap the bars into place, which takes some force and would not be considered easy.
When choosing a weight distribution hitch you want the total tongue weight to be as close to the middle of the WDH rating... view full answer...
When choosing the correct weight distribution hitch you need to be as close to the weight of the loaded tongue weight of the trailer. If your weight distribution hitch is rated over or under the recommended tongue weight of the trailer it could be more hurtful than not having a weight distribution hitch at all.
The Fastway e2 Weight Distribution # FA92-00-0450 has a tongue weight between 200 pounds to 450 pounds which puts your trailer's tongue weight right in the middle. The shank has... view full answer...
I believe we have just what you're looking for. Check out the Curt Adjustable Weight Distribution Shank # C17100. This weight distribution shank has 7 holes for adjustment, will work with 2" trailer hitches, and has a maximum weight capacity of 15,000 lbs. view full answer...
Which weight distribution hitch you'll need will depend on the specs of the trailer- the GVWR and the tongue weight of the trailer. From what I was able to find it looks like a typical 2 horse Featherlite trailer will weigh around 8000-lbs fully loaded. I recommend using a weight distribution hitch like the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 12,000 lbs GTW, 1,200 lbs TW # FA92-00-1200, which has a tongue weight range of 800-lbs to 1200-lbs, so it will work... view full answer...
The Replacement Spring Bar for Husky Center Line Weight Distribution System Qty 2 Item # HT32330 is what you need to replace the bars on your Husky Weight Distribution Hitch. The tongue weight capacity for this product is 600 lbs - 800 lbs.
Just to ensure you are measuring your tongue weight correctly, I have attached a help article that will help you with this process.
I have attached product videos on this product on this page. view full answer...
To determine which hitch extension you will need for pulling your trailer behind your 2022 Ford F-350 with the factory 3" receiver while you are carrying a truck bed camper you will need to measure the distance needed for the amount the camper sticks out. We have a few different length extensions that you will need to use with a weight distribution hitch to haul your trailer.
36" TorkLift Cannon Hitch Extension # TLE1636
42" TorkLift Cannon Hitch Extension # TLE1642
48" TorkLift Cannon... view full answer...
You can absolutely get the Equal-i-zer weight distribution hitch and a 2-1/2" shank, you simply need to get the system and shank separately, starting with the Equal-i-zer Weight Distribution with 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200 lbs TW # EQ37121ET.
Then, you just need to get the shank for a 2-1/2" receiver that has the maximum rise or drop you need:
- 7" Rise, 3" Drop: Equal-i-zer Weight Distribution Shank - 2-1/2" Hitch # EQ90-02-4700
- 8" Rise, 4" Drop: Equal-i-zer... view full answer...
When it comes with using a Gen Y Hitch with a weight distribution system I recommend The Gen-Y Torsion Weight Distribution Shank - 2 inch Hitches - 6-1/2 inch Drop/Rise - 1,700 pounds TW # 325-GH-1202. This shock-absorbing shank will give you 6 mounting positions for attaching your weight distribution system. It has a heavy-duty steel construction.
When it comes to a weight distribution hitch I would recommend The Equalizer Brand like The Equal-i-zer Weight Distribution System w/ 4-Point... view full answer...
In order to use the Curt TruTrack Weight Distribution System w/ Sway Control # C17501 in your 2-1/2" hitch you would just need to get the Curt Weight Distribution Shank for 2-1/2" Hitches # C17131 and swap that out with the shank that comes with the weight distribution system. The # C17131 is the maximum 6" rise and 2" drop you mentioned. The # C17131 shank has holes 1-1/4" apart so that you can get level with your trailer.
There is also the Curt Weight Distribution Shank for 2-1/2" Hitches... view full answer...
By torsion hitch and torsion bars, I believe you are referring to a weight distribution hitch, and there is an option for one that will allow a 6 inch drop. So long as your 12,000 lb trailer's total tongue weight - the tongue weight of your fully loaded trailer plus the weight of any cargo behind the rear axle of your truck - is no more than 1,500 lbs, you can use one of the following weight distribution hitches, depending on if you want sway control or not:
- Reese Weight Distribution... view full answer...
We have a weight distribution shank with quite a bit of drop that will work your Fastway e2 weight distribution hitch, but the part number you mentioned will not because it is a standard ball mount and doesn't have the correct hole spacing. But we do have an option from Equal-i-zer (who manufactures Fastway) that fits a 2-1/2 inch hitch and offers up to 12 inches of drop:
- Equal-i-zer Weight Distribution Shank - 2-1/2" Hitch - 12" Drop # EQ34FR
This shank has the most drop available... view full answer...
We recommend using a weight distribution hitch whenever the trailer weight is more than 50 percent of the tow vehicle's weight of if you're experiencing sway or sagging issues.
If you need a weight distribution shank, like the Curt # C17124, I've linked our selection for 2 inch hitch receivers for you. view full answer...
I may have a solution for you, but the reason that most hitches that can be used on RVs like your 1996 Chevy P30 Class A do not allow for use of weight distribution hitches is because of the leverage that is created at the rear of the frame and the distance away from the rear axle.
With that said, if the distance from outside the frame on one side to outside of the frame on the other side you can use the Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide # 5350. This hitch can be used... view full answer...
I've got a couple of options for you but the Curt trailer hitch you have, part # 13534, is not rated for weight distribution and you should not use weight distribution with it.
There is however, one hitch that fits your 2012 Toyota Highlander that is rated for weight distribution; the Draw-Tite # 75586. It's a little bit different of a design but installs in the same way. The hitch fits under the exhaust instead of over it like the Curt does.
Another option is to forego the complete... view full answer...
There are shanks for your Fastway e2 weight distribution hitch that will fit your Ram's 2-1/2 inch hitch receiver, and what you can do is use one from Equal-i-zer, who manufactures the Fastway weight distribution systems. There are a number you can use, with differing amounts of drop.
- Maximum Drop of 3 Inches: Equal-i-zer Weight Distribution Shank # EQ90-02-4700
- Maximum Drop of 6 Inches: Equal-i-zer Weight Distribution Shank # EQ90-02-4900
- Maximum Drop of 9 Inches: Equal-i-zer... view full answer...
When it comes to installing a weight distribution hitch on your travel trailer which weights 3,877 fully loaded
you will need a weight distribution system and I recommend The Fastway e2 Weight Distribution # FA92-00-0450.
This weight distribution system has a gross towing weight up to 4,500 pounds and has a tongue weight up to 450 pounds, so your travel trailer fits in the correct weight category. It has a maximum rise of 7-1/2 inches and a maximum drop of 2-3/4 inches. Everything is... view full answer...
You are able to use a weight distribution system while having air bag suspension on your 2009 Land Rover Range Rover Sport. When choosing the correct weight distribution system I recommend The Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 8,000 pounds GTW, 800 pounds TW # FA92-00-0800.
This distribution system has a gross towing weight up to 8,000 pounds and has a gross tongue weight between 400 pounds to 800 pounds. When using a weight distribution system you want... view full answer...
When it comes to installing a weight distribution hitch on your 2022 Dodge Ram 1500 Big Horn I recommend The Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 8,000 pounds GTW, 800 pounds TW # FA92-00-0800.
When using a weight distribution hitch it's best to be as close to the tongue weight as possible. Being over or being under the tongue weight while using a weight distribution system can be dangerous and cause more sway. The Fastway distribution system has a tongue... view full answer...
I have a solution for you but I am sorry the Automatic Level Control system on your 2017 Yukon Denali can not be used with a weight distribution system. The two components work in opposition of each other and it will diminish your ride quality. You will want to use an electronic trailer sway control system like the Tuson Asymmetric Sway Control - 1 to 4 Axles item # 335TSC-1000. The electronic sway control system helps correct sway in trailers without weight distribution. It monitors trailer... view full answer...
The Hitch Extender # HE12 will extend your trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles. The extender has a solid steel shank and has a black powder coat that will help resist rust and corrosion. It will extend out 14 inches.
The weight capacity when using a weight distribution hitch will be up to 7,000 pounds and the tongue weight will be up to 700 pounds. Using this extender will reduce your hitch's overall capacity by 1/3.
The Fastway e2 Weight... view full answer...
Go To Results